How to connect JBL headphones to your phone, computer, or TV.

New JBL headphones and unsure how to connect them to your phone, laptop, or TV? Don't worry! This article will guide you step-by-step on how to quickly and easily pair your JBL headphones with any Bluetooth device, even if you're not tech-savvy. With just a few simple steps, you can listen to music, make calls, study online, or watch movies without cumbersome wires.

How to quickly connect JBL headphones

1. Quick connection with newer Android phones.
If you're using a newer version of Android, your JBL headphones may automatically display a connection notification. Simply open the charging case lid and tap the notification on your phone screen to connect immediately.

2. Manually connect to older Android devices or iPhones.

• Turn on Bluetooth on your phone.

• Open the lid of the JBL headphone case.

• Wait for the headphone name to appear in the list of Bluetooth devices, then select it to connect.

3. Connect to a computer or laptop.

• Turn on Bluetooth on your computer or laptop.

• Unboxing JBL headphones.

• Find and select the headphone name in the Bluetooth list to complete the connection.

Part 1: Quickly Pairing JBL Headphones with Android (Fast Pairing)

Step 1: How to quickly connect JBL headphones to your Android phone

1. Open the charging case lid or remove the earbuds.
Fast Pairing will begin when you open the charging case lid or take one of the earbuds out.

2. Note: This only applies to Android 6.0 and above.
This feature only works with Android phones running version 6.0 or higher. Your phone needs to meet the following conditions:

• Unlock the screen (it's not currently in lock mode).

• Google Play services are active (they are always on by default, unless you have manually turned them off).

• Location services are enabled.

3. How to turn on location services

• Swipe down from the top of the screen to open the Quick Settings panel.

• Tap the map pin icon.

  • Gray: not turned on.

  • Green: Location services are enabled.

4. Make sure the headphones are charged and powered on.
JBL headphones need to be fully charged and turned on to connect using the Fast Pair feature.

Step 2: Connect your JBL headphones using the Fast Pair feature on Android.

1. Tap the notification that appears on the screen.
When the headphones are near your Android phone, a notification window will automatically pop up suggesting a connection. Simply tap that notification to pair.

2. The headphones will signal when the connection is successful.
Once connected, you will hear the headphones emit a "BT connected" sound (Bluetooth connected).

3. How to disconnect and return to pairing mode
If you want to disconnect:

• Touch and hold your finger on the back of the earpiece for about 5 seconds.

• The headphones will disconnect from the connected device and automatically switch to a waiting mode for pairing with a new device.

4. No notification? Try connecting manually.
If your phone doesn't show an automatic notification, you can still connect manually. See the section on manually connecting to Android for instructions.

Part 2: Guide to connecting JBL headphones to older Android devices (manual pairing)

Step 1: Turn on your JBL headphones and begin the connection process.

1. Open the charging case lid or take out one (or both) earbuds.
When you open the case lid or take the earbuds out, they will automatically power on.

2. The headphones will automatically enter connection standby mode.
If the headphones are not connected to any other device, they will automatically switch to Bluetooth pairing standby mode.

Step 2: Turn on Bluetooth on your Android phone.

1. How to turn on Bluetooth
You can turn on Bluetooth in one of two ways:

• Go to Settings → select Bluetooth → turn on the switch.

• Alternatively, swipe down from the top of the screen to open the Quick Settings panel → tap the Bluetooth icon (stylized letter B).

2. Find a device near you.
After turning on Bluetooth, the phone will automatically scan and display a list of nearby available devices, including JBL headphones if they are turned on and ready to connect.

Step 3: Select JBL headphones from the Bluetooth list.

1. Click on the JBL headphone name in the list of devices.
When you see the JBL headphone name appear in the Bluetooth list, simply tap on it to begin connecting.

2. Enter your password if prompted.
Some devices may require a connection code. By default, the code is usually 0000. If it's incorrect, you can refer to the user manual that came with the headset to find the correct code.

3. Connection successful
Once connected, the headphones will emit a "BT connected" sound (Bluetooth connected).

4. Disconnect and put the headphones into standby mode.

• To disconnect, touch and hold your finger on the back of the earpiece for about 5 seconds .

• The headphones will disconnect from the current device and automatically switch to standby mode to connect to a new device.

Part 3: The Easiest Way to Pair JBL Headphones with iPhone & iPad

Step 1: Open the charging case lid or take out the JBL earbuds.

When you open the charging case lid or take one/both earbuds out , the earbuds will automatically power on and enter Bluetooth connection standby mode .

Note:
If the headphones are connected to another device (for example, the phone you previously paired them with), they may automatically reconnect to the old device and not allow a new connection . In this case, disconnect from the old device before trying to reconnect to the new device.

Step 2: Turn on Bluetooth on your iPhone

1. How to turn on Bluetooth
You can turn on Bluetooth in one of two ways:

• Go to Settings → select Bluetooth → toggle the switch to On .

• Alternatively, swipe down from the top right corner of the screen to open the Control Center → tap the Bluetooth icon (shaped like the letter B).

2. Find a device near you.
Once Bluetooth is enabled, the iPhone will automatically scan and display a list of nearby available devices — including JBL headphones if they are turned on and ready to pair.

Step 3: Connect the JBL headphones to your iPhone.

• Tap on the JBL headphone name in the Bluetooth list.
  When the headphones appear in the list of devices on your iPhone, tap the headphone name to begin connecting.

• Enter your password if prompted.
  If your iPhone asks for a password, it's usually 0000. You can also check the password in the user manual that came with the headphones.

• Connection successful
  Once connected, you will hear the headphones emit a "BT connected" sound (Bluetooth connected).

• Disconnect the headphones.
  To disconnect, touch and hold your finger on the back of the earbud for about 5 seconds . The earbud will disconnect and enter standby mode to connect to another device.

Part 4: Easily connect your JBL headphones to your Windows 10/11 computer.

Step 1: How to turn on the headphones and connect quickly

• Open the charging case lid or remove one or both earbuds.

• The headphones will automatically turn on if they have battery power.

• The green light illuminates to indicate that the headphones are in connection mode.

Step 2: How to turn on Bluetooth on a Windows computer

• Turn on Bluetooth on your desktop or laptop computer.

• How to enable it varies depending on your Windows version:

  • Windows 10: Press the Win + I key combination, select Devices > Bluetooth, and then turn on the Bluetooth switch.

  • Windows 11: Press Win + I, select Bluetooth & devices, then turn on the Bluetooth switch.

Step 3: How to add a new Bluetooth device

• Click on “Add device”.

• A new window will appear allowing you to select the device to connect.

Step 4: Select Bluetooth to search for devices.

• Select the Bluetooth option, usually the first one in the list.

• The computer will begin searching for nearby Bluetooth devices to connect to.

Step 5: Connect the JBL headphones to your computer.

• Select your JBL headphones from the list of found devices.

• Once the connection is successful, you will hear the message "BT connected" from the headset.

• Headphones usually pair automatically, but sometimes you need to download additional software to help.

Part 5: How to connect JBL headphones to your Macbook & iMac in a few steps

Step 1: How to turn on the headphones and prepare for connection

• Open the charging case lid or remove one or both earbuds.

• The headphones will automatically turn on if they have battery power.

• The green light illuminates to indicate that the headphones are in pairing mode.

Step 2: How to turn on Bluetooth on your Mac

• Tap the Bluetooth icon in the menu bar and select “Turn Bluetooth On”.

• If you don't see the Bluetooth icon, go to the Apple menu > System Settings > Bluetooth and turn Bluetooth on there.

• Once turned on, your JBL headphones will appear in the list of nearby devices ready to connect.

Step 3: Connect the headphones to your Mac.

• Select your headphones from the list of devices.

• If prompted, press "Accept" on your device to complete the connection.

Part 6: Pairing JBL headphones with Smart TVs from popular brands

Step 1: How to turn on the headphones and prepare for pairing.

• Open the charging case lid or remove one or both earbuds.

• The headphones will automatically turn on if they have battery power.

• The green light illuminates, indicating that the headphones are in pairing mode.

Step 2: How to open settings on your TV

• Go to Settings on your TV.

• Depending on the brand, the way to access Settings will vary, so you can refer to the instructions or menu on your TV.

Step 3: Turn on Bluetooth on the TV.

• In Settings, find and select Bluetooth.

• If Bluetooth isn't already turned on, turn it on now.

Step 4: Connect the JBL headphones to the TV.

• Select your JBL headphones from the list of nearby available Bluetooth devices.

• If prompted for a password, enter “0000”.

• Once the connection is successful, you will hear the message "BT connected" from the headset.

Part 7: Troubleshooting JBL Headphone Connection Issues: A Step-by-Step Guide

Step 1: Turn off Bluetooth on other devices to make connecting the headphones easier.

• If your JBL headphones don't appear or connect, it might be because they're currently connected to another device.

• For example, if the headphones are already paired with the laptop, when you turn them on, the laptop will automatically reconnect.

• To connect to a new device like a phone, you should turn off Bluetooth on your laptop first so the headphones are ready to pair with the new device.

Step 2: Restart the headphones to resolve connection issues.

• If the connection is interrupted or the sound is poor, turn the headphones off and then back on.

• If the problem persists, try selecting “Forget” or “Unpair” on your phone, computer, or TV.

• After that, you'll need to pair the headphones again from scratch to establish a new connection.

Step 3: Make sure the headphones are fully charged.

• In many cases, poor sound quality is due to a weak battery.

• Please check and fully charge the earbuds or charging case before using them again.

Step 4: Move closer to the Bluetooth device for a better connection.

• If your JBL headphones aren't connecting to your TV from 3 meters away, move them closer to the TV for easier pairing.

• The greater the distance, the weaker the Bluetooth signal becomes, making it difficult to connect.

• Additionally, other sources like water, microwaves, or other Bluetooth devices can interfere with the signal, so keeping them close together will help stabilize the connection.

Translated by: Rene Lee Nguyen .